Fire Protection Services
Fire Alarm System Inspection,
Testing & Service
Certified fire alarm system inspection, testing, installation, repair, and monitoring for commercial properties across Miami-Dade, Broward, and South Florida. NFPA 72 compliant, Florida licensed, available 24/7.
What We Provide
Fire Alarm System Inspection, Testing & Service
A fire alarm system that has not been tested and maintained has no confirmed reliability. Detectors drift out of sensitivity range, batteries fail, and notification devices malfunction, all without triggering any visible indication of a problem until the system is put to the test by an actual fire or an AHJ inspection.
At Firemax Fire Protection, our licensed fire protection company provides complete fire alarm services for commercial buildings across South Florida, from annual inspection and testing to panel programming, system installation, and ongoing monitoring.
Under NFPA 72, fire alarm systems must be inspected and tested on a documented schedule. Florida's AHJ inspectors actively enforce this requirement, and a building that cannot produce current test records faces citations regardless of whether the system actually functions.
"The alarm activated and gave occupants four minutes to evacuate before the fire reached the corridor. Everyone got out."
Early detection saves lives. A tested, maintained fire alarm system is the difference between an incident and a tragedy.
What Our Fire Alarm Service Covers
We provide complete fire alarm system inspection, testing, installation, and maintenance services for all types of commercial fire alarm systems including conventional, addressable, and voice evacuation systems.
Not sure what your facility needs? Call our team and we will walk you through it at no charge.
Why It Matters
Common Fire Alarm Problems We Solve
Fire alarm systems develop deficiencies that are invisible during normal operation. These are the issues we find most often during inspection and testing.
Detectors Outside Sensitivity Range
Smoke detectors have a defined sensitivity range and must be tested annually to confirm they fall within it. Detectors that are too sensitive generate nuisance alarms. Detectors that are not sensitive enough may fail to activate during an actual fire. Sensitivity testing is required by NFPA 72 and is one of the most important components of annual fire alarm inspection.
Dead or Degraded Batteries
Fire alarm system batteries and notification appliance circuit batteries degrade over time and may fail to power the system during a utility outage. Annual testing must include a load test of the battery system to confirm it can sustain the system through the required standby period.
Missing or Incomplete Test Records
NFPA 72 requires fire alarm systems to be tested annually at minimum, with results documented in a test and inspection report. Buildings that cannot produce current records face violations during AHJ inspections. We document every test result and provide reports formatted for AHJ submission.
Notification Devices That Fail During Testing
Horns, strobes, and speakers that fail during testing must be repaired or replaced before the system can be certified. These failures are common in older systems and in coastal environments where humidity and salt air accelerate component degradation.
Panel Trouble Conditions Left Unresolved
Fire alarm panels often display trouble conditions that building staff acknowledge and ignore without resolving the underlying cause. Unresolved trouble conditions can mask actual alarm signals and leave the system in a compromised state. We identify and resolve all outstanding trouble conditions during every service visit.
Inadequate Coverage After Renovation
Building modifications, new tenant improvements, and HVAC changes can create areas without adequate smoke or heat detection. Any change to a protected space should be followed by a coverage review to confirm the detection system still meets NFPA 72 design requirements.
Dealing with a compliance issue? Talk to our team and we will help you find the right path forward.
Our Process
How Our Service Process Works
Every engagement follows a consistent process designed to get your building compliant quickly and keep it that way.
System Review
We review existing documentation, inspect the fire alarm panel and all accessible devices, and identify any outstanding trouble conditions, deficiencies, or overdue tests.
Full System Test
We test every initiating device, notification appliance, and supervisory signal function, documenting results for every device and identifying any that fail to perform within specification.
Repair and Correction
We replace failed devices, resolve panel trouble conditions, update programming, and correct any deficiencies identified during testing in the same visit whenever possible.
Documentation
We issue a complete test and inspection report covering all findings and test results, formatted for AHJ submission, insurance documentation, and your compliance records.
What We Check
What Our Technicians Inspect and Test
Code Compliance
Applicable Codes & Standards
Every service we perform is documented and verified against the applicable codes. We ensure your facility meets the requirements of the following standards.
Who We Serve
Industries & Property Types We Service
FAQ
Frequently Asked Questions
NFPA 72 requires a full inspection and test of fire alarm systems at least annually. Some components, including batteries and monitoring signals, require more frequent testing. Florida AHJ inspectors check for current test records, and buildings without documentation face violations regardless of system condition.
Smoke detectors have a defined sensitivity range measured in percent obscuration per foot. Annual sensitivity testing confirms each detector falls within the manufacturer-specified range. Detectors outside the range must be cleaned or replaced. This test requires specialized equipment and cannot be performed by building maintenance staff.
Deficiencies found during inspection must be corrected within a timeframe specified by the AHJ. In some cases, serious deficiencies may require an impairment notification and a fire watch while the system is non-operational. We perform repairs and corrections in the same visit whenever possible to minimize system downtime.
Most commercial occupancies require both a fire alarm system and a fire sprinkler system under the Florida Building Code. The fire alarm detects and notifies; the sprinkler system suppresses. Many occupancy types require both under Florida's adoption of NFPA 101. We can assess your specific building type and advise on applicable requirements.
Yes. We design and install fire alarm systems for new construction, tenant improvements, and full building renovations. All installations are performed to current NFPA 72 and Florida Building Code requirements and are submitted to the AHJ for inspection and approval.
Every test produces a written report documenting every device tested, the test result, any deficiencies found, and the corrective actions taken or recommended. We also provide the system summary and monitoring signal confirmation. Reports are formatted for AHJ submission and insurance carrier requirements.
Ready to Get Started
Schedule Your Fire Alarm Inspection and Test Today
Don't wait for an AHJ visit or an actual emergency to find out your fire alarm system has unresolved deficiencies. Firemax Fire Protection has been serving South Florida commercial properties since 1998. Call us or request a quote and our team will respond promptly.